SACB-4/ 8-C SCO SELECT

https://www.phoenixcontact.com/us/products/1437258 Sensor/actuator box - SACB-4/ 8-C SCO SELECT - 1437258 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator box, connection method: M12-SPEEDCON-socket Metal, number of slots: 4, number of positions: 5, coding: A - standard, slot assignment: Parallel, status display: No, Universal; master cable connection: Pluggable screw connection 180°, shielding: no Your advantages  Safety in the field, thanks to molded housing and high degree of protection  Flexible, distributed bundling of signals in one master cable  Save time, thanks to installation with SPEEDCON fast locking system  Flexible: distributor box with connector hood for on-site assembly Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356455602 Weight per Piece (excluding packing) 260.000 g Custom tariff number 85366990 Country of origin Poland Technical data General Rated voltage 48 V AC 60 V DC Current carrying capacity per I/O signal 2A Current carrying capacity per slot 4A Total rated current 10 A Number of positions 5 08/29/2019   Page 1 / 6 https://www.phoenixcontact.com/us/products/1437258 Sensor/actuator box - SACB-4/ 8-C SCO SELECT - 1437258 Technical data General Number of slots 4 Flammability rating according to UL 94 V0 Sensor/actuator connection system M12-SPEEDCON-socket Note NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties. Unused slots are to be sealed off prior to commissioning. Suitable sealing elements are to be found under "Accessories". Ambient conditions Degree of protection IP65 IP67 IP69K Ambient temperature (operation) -30 °C ... 80 °C Ambient temperature (storage/transport) -30 °C ... 90 °C Master cable data/connection data Connection method Pluggable screw connection Conductor cross section min. (signal) 0.14 mm² Conductor cross section max. (signal) 1.5 mm² Conductor cross section AWG min. (signal) 26 Conductor cross section AWG max. (signal) 16 Stripping length (signal) 7 mm Conductor cross section min. (energy) 0.14 mm² Conductor cross section max. (energy) 1.5 mm² Conductor cross section AWG min. (energy) 26 Conductor cross section AWG max. (energy) 16 External cable diameter min. 7 mm External cable diameter max. 12 mm Tightening torque, cover screw 0.35 Nm Tightening torque, union nut 2.5 Nm Tightening torque slot sensor/actuator cable 0.4 Nm Tightening torque of mounting screw for fixing the housing 0.5 Nm Insulation material Housing material PBT Material of the moulding mass PUR Contact material Cu alloy Contact surface material gold-plated 08/29/2019   Page 2 / 6 https://www.phoenixcontact.com/us/products/1437258 Sensor/actuator box - SACB-4/ 8-C SCO SELECT - 1437258 Technical data Insulation material Contact carrier material PA Material of contact, master cable side CU alloy Material of contact surface, master cable side Gold-plated Material of the contact carrier on the master cable side PA 6.6 V0 Material of threaded sleeve Zinc die-cast Material of threaded sleeve surface Nickel-plated O-ring material NBR Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 V0 Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Classifications eCl@ss eCl@ss 5.1 27250300 eCl@ss 6.0 27279200 eCl@ss 7.0 27279219 eCl@ss 8.0 27279219 eCl@ss 9.0 27440108 ETIM ETIM 3.0 EC001856 ETIM 4.0 EC002585 ETIM 5.0 EC002585 ETIM 6.0 EC002585 ETIM 7.0 EC002585 UNSPSC UNSPSC 6.01 31261501 UNSPSC 7.0901 31261501 UNSPSC 11 31261501 08/29/2019   Page 3 / 6 https://www.phoenixcontact.com/us/products/1437258 Sensor/actuator box - SACB-4/ 8-C SCO SELECT - 1437258 Classifications UNSPSC UNSPSC 12.01 31261501 UNSPSC 13.2 31251501 Approvals Approvals Approvals UL Recognized / cUL Recognized / EAC / cULus Recognized Ex Approvals Approval details UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     Nominal voltage UN 48 V Nominal current IN 4A cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     Nominal voltage UN 48 V Nominal current IN 4A  File E 118976  File E 118976 EAC      EAC-Zulassung cULus Recognized       08/29/2019   Page 4 / 6 https://www.phoenixcontact.com/us/products/1437258 Sensor/actuator box - SACB-4/ 8-C SCO SELECT - 1437258 Accessories Accessories Labeled device marker Contactor marker - zack marker strip - SS-ZB WH CUS - 0824470 Contactor marker - zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 20 mm, lettering field size: 20 mm x 8 mm     Contactor marker - zack marker strip - SS-ZB YE CUS - 0824471 Contactor marker - zack marker strip, can be ordered: Strip, yellow, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 20 mm, lettering field size: 20 mm x 8 mm     Protective cap Screw plug - PROT-MS SCO - 1553129     Screwdriver tools Tool - SAC BIT M12-D15 - 1208432 Nut for assembling sensor/actuator cables with M12 connector and M12 connectors for assembly, with a knurl diameter of 15 mm, for 4 mm hexagonal drive     08/29/2019   Page 5 / 6 https://www.phoenixcontact.com/us/products/1437258 Sensor/actuator box - SACB-4/ 8-C SCO SELECT - 1437258 Accessories Tool - SACC BIT M12-D20 - 1208445 Nut for assembling M12 connectors for assembly with a knurl diameter of 20 mm, for 4 mm hexagonal drive     Philips screwdriver - SZK PZ1 VDE - 1206450 Screwdriver, PZ crosshead, VDE insulated, size: PZ 1 x 80 mm, 2-component grip, with non-slip grip     Stripping tool Stripping tool - WIREFOX 4 - 1212156 Stripping tool, for cables and conductors (especially for rubber and silicone insulations) from 0.1 - 4 mm², self-adjusting, stripping length of up to 18 mm, cutting capacity of up to 10 mm² stranded/1.5 mm² solid, replaceable stripping blade     Torque tool Torque screwdriver - TSD 04 SAC - 1208429 Torque screwdriver, with preset torque of 0.4 Nm and 4 mm hexagonal drive for M12 connectors     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 08/29/2019   Page 6 / 6